Kinetik Precast Oil

Kinetik Precast Oil Series

Kinetik Precast Mould Oil is a formulated blend of mineral oils with additives and a degree of surfactant designed to work as a concrete release oil for demoulding concrete from all types of formwork moulds. It can be used on a wide range of metal, proprietary timber, ply and other formwork materials and coatings.
Kinetik Precast is formulated to give optimum release and quality of finish to concrete over a wide range of mix designs. Product is low hazard and not labelled as flammable.

Available size: 200L / 18L

Kinetik Precast Oil

Application: Product is supplied ready for use do not dilute. All formwork surfaces should be clean prior to application. Apply a thin uniform coating to the formwork surface avoiding over application. Spraying is the preferred method of application using a sprayer such as a Mesto Ferrox Plus 3585P or Mesto Profi Plus 3270P with an 8001 Nozzle fitted , however brushes or rollers may be used. Ensure any excess is mopped up as over application can cause dusty concrete, pay particular attention to the bottom of vertical shutter for run off.

Once the formwork has been struck apply again as soon as possible to give added protection from weather.
Properties:
  • Effects a clean positive release, which reduces labour costs, cleaning time and possible damage to formwork.
  • Produces a uniform stain free, quality concrete finish.
  • Protects timber forms against ingress of moisture, extending their useful life.
  • Oil based product helps prevent rusting of metal forms, supports and associated equipment.
  • Product is supplied ready for use, most economically
  • Gives optimum release.
  • Easy to apply
  • Spray applied
Coverage: 15-45m²/litre dependent on type of formwork, it’s absorbency and profile